Panasonic ez180 flash file

panasonic ez180

flash file

Download here

Samsung E1207T bilinking problem 100% done

Samsung E1207T bilinking problem 100% done 

interface use z3x box. cable name j750 or c450 select serial port ur box port

using three file cla ,lpd, tfi , bin folder open cla select. and csc folder open lpd and tfi selected.

E1207T flasher and file 100% ok

Download Here

MICROMAX A62 FLASH

MICROMAX A62 FLASH

micromax a62 full flash by flash tool

flash file
Download here

flash tool
Download here

Micromax A67 hard reset solution

Micromax A67 Finally tested with out lossing data solution with Volcano

1st go to MTK Tab select default Built-in Boot _ Auto

2nd click on one key root 

3rd untick Auto Detect Pinout

4th select usb mode .

5th select ADB_Root

6th power on ur phone after on screen u will see enter gmail id & pass

Click on Run 

connect your phone with pc ...

after that u see connecttion phone 

phone connection is successfull

Root process may restart the phone several times, keep your phone and data lines connected correctly.
Getting Root privileges, please wait...
Phone Model: Micromax A67
Android Release: 4.0.3

wait for the full process it may takes maximum 5 to 7 mins just wait aftr root success phone is reboot thn again 

after root just change the option 

now select Reset_Gmail

and run.

Done Enjoy with out losssing data...................

here is snapshoot of A67 Gmail account remove without loosing data

Karbonn K63+

Karbonn K63+ flash file

DOWNLOAD HERE

Karbonn A9+ Hard Reset Done Without PC

   Karbonn A9+ Hard Reset Done WithoutPC  

KARBONN A9+ HARD RESET

[-switch off

-press vol up and power on key together 20 seconds (it takes pretty long time)

-You will enter green screen, but need to press the power key again

-Now you will enter the red screen.

-There on your android will appear and all the options too.

-For selecting use the volume up and down keys, but to select an entry you need to press the power on key for a little longer.

Power on and vol down key will probably lead you to download mode.

do factory reset & its done

Samsung E1200T Blinking Problem

Samsung E1200T Blinking Problem 100% DONE by Z3X Samsung Tool.....

Tools: 

1.Z3x Samsung Tool

2.Cable RJ45 J750


Procedures:

1.Download Flashfile For E1200T ....e1200tdxll1_olall1


2.Run Samsung Exe Tool by Z3x

3.Set FlashFile 

4.First Attempt Reflash With 3 Version Firmware Problem Not Solved???

5.Second Attempt Click Erase EEP and Do Click Firware , Wait Until DONE Flashing...SUCCESS But IMEI Problem!

6.Rebuild IMEI and Click CUSTOM DONE! Successfull..............

OKTEL K8 FLASH FILE

OKTEL K8 COOLSAND FLASH FILE

OKTEL K8 4MB FLASH FILE

Download

HCL ME U1 Tablet Flash

 HCL ME U1 Tablet Flash

1. run MPTool.exe

2. click the setting button


3. click the button for PAK and choose the PAK file named vortex.pak


4. then click the Save and Return button.


5. connect the USB to the device and your device should be in power off
state.


6. press the power button and the button next to the power button at
the same time.


7. if step 6 is success you will get a vdfu disk.


8. press the scan button, wait till the scan finishes.


9. if step 8 is success, the update button will be enabled, click the
update button.


10. when the update is completed, the device will reboot automatically,
if not pls reset the device and then press the power button.

For the 1st time the device reboots for 5 to 10min.
Now it is brand new HCL ME U1 with inbuilt playstore.

Download here file & tool

Click

ZEN_M8 FLASH FILE

ZEN_M8 FLASH FILE

ZEN_M8_MSTAR 8533c GIGA_GD25LQ64

NOKIA 105 LOCAL MODE SOLUTION

NOKIA 105 LOCAL MODE SOLUTION

NOKIA 105 LOCAL MODE

100% REMOVED by Flash 

NOKIA 105 FLASH THIS FILE

AND REMOVE LOCAL MODE

Download

Richtel A2 SPD 6820 FLASH FILE

download file here

fLASH fILE

Micromax C100 (QSC1100) download guide

Micromax C100 CDMA 

1. Connect the phone to PC by USB cable. If it is the first time connection, the driver
should be installed according to the requirement.

2. After connection successfully, confirm the COM port of the phone. For example:
the port of following Picture is COM4. (system properties>hardware>device
manager>Ports)
http://i1206.photobucket.com/albums/...Micromax/1.jpg

3. Click MutiDL 60X5_11XX_V2.51 in the tool Folder.

4. Then you will get the following interface:
You can choose the correct port accordingly, in our example, the port No is COM4, so we
select COM4.

http://i1206.photobucket.com/albums/...Micromax/2.jpg

5. Select “Open”, you will get the following interface, select Browse, then you can
choose the SW in your PC, and choose the file named “config.bmbn” and “open” it.
Normally we will mark the “Erase EFS” option. This will erase everything in the
phone.

http://i1206.photobucket.com/albums/...Micromax/4.jpg

6. press OK in following interface:

http://i1206.photobucket.com/albums/...Micromax/3.jpg

7. Click “Start” on your choosing COM port:

http://i1206.photobucket.com/albums/...Micromax/5.jpg

8. Wait the downloading, as the following pictures: if the process bar is blue, it means
during the download process, please do not interrupt it. If the bar is green, and it
shows “Download OK” it means the download is finish. While if the bar is red, it
means some failure happens during the download.
9. Finish. When you see the green bar and “Download OK” it means this flashing
process is done.

http://i1206.photobucket.com/albums/...Micromax/6.jpg

                      Download Here Flasher, driver And Flash File

 http://www.4shared.com/rar/qA4Squ48ce/Micromax_C100__QSC1100__downlo.html

yestel java 5c flash file

yestel java 5c flash file link

 

DOWNLOAD 

CHINA FLASH FILE

Disco m7 flash file

DISCO M7 flash file 6531 spd 8MB read by volcano box
FILE DOWNLOAD 

 C5 Mstar flash file link

DOWNLOAD

Hard Reset Micromax Canvas HD A116

Hard Reset Micromax Canvas HD A116

Switch Off your phone.
Press and hold Power button together with ‘volume +’ and ‘volume –’ buttons on the side of phone until you get two options.
Now, press the ‘volume +’ button to enter into the recovery mode.
This will make a Android icon appears on screen, press power button.
This will get you the menu options, use the volume up and down button to choose the option.
To select the option, you needs to simultaneously press two touch sensitive buttons on the bottom of your device, left button which is for the Menu and right button which is for going into previous stage. You have to do this for about 3 seconds.
Choose the wipe data/factory reset then press the enter button (left button which is for the Menu and right button which is for going into previous stage). Now, phone will get switch off and brings to its initial stage.

Done! with this default way to factory reset you have successfully done with hard reset of your Micromax Canvas HD A116. 

KARBONN A6

KARBONN A6 FLASH TOOL

http://support.moulnisky.com/index.php?dir=Karbonn/A6/

KARBONN A6 v1.22 download link

http://www.4shared.com/rar/Esvep7q3/A6_New_Hardware_V122.html

KARBONN A6 FLASH FILE v1.17 LINK

http://www.4shared.com/rar/795jkJ4Rce/a6_v117_20130507_1400_update.html?

Samsung

Samsung E2232 Hindi Language Flash File

http://www.2shared.com/file/7iAZ9W7o/Samsung_E2232_Hindi_Language_F.html

Samsung Galaxy Y S5360 Hard Reset Procedures :

1. Power off phone
2. Press and hold Home Button ( middle ) + Volume Up + power on button
3. Wait for 5 second until Android System Recovery menu appear
4. There are 4 options

reboot system now
apply update from sdcar
wipe data/factory reset
wipe cache partition

5. Move the options to " Wipe data / factory reset " using volume down ( - ) button and menu button to confirm, because the touchscreen doesn't work in reovery mode
6. After the process done, phone will reboot.