Micromax C100 (QSC1100) download guide

Micromax C100 CDMA 

1. Connect the phone to PC by USB cable. If it is the first time connection, the driver
should be installed according to the requirement.

2. After connection successfully, confirm the COM port of the phone. For example:
the port of following Picture is COM4. (system properties>hardware>device
manager>Ports)
http://i1206.photobucket.com/albums/...Micromax/1.jpg

3. Click MutiDL 60X5_11XX_V2.51 in the tool Folder.

4. Then you will get the following interface:
You can choose the correct port accordingly, in our example, the port No is COM4, so we
select COM4.

http://i1206.photobucket.com/albums/...Micromax/2.jpg

5. Select “Open”, you will get the following interface, select Browse, then you can
choose the SW in your PC, and choose the file named “config.bmbn” and “open” it.
Normally we will mark the “Erase EFS” option. This will erase everything in the
phone.

http://i1206.photobucket.com/albums/...Micromax/4.jpg

6. press OK in following interface:

http://i1206.photobucket.com/albums/...Micromax/3.jpg

7. Click “Start” on your choosing COM port:

http://i1206.photobucket.com/albums/...Micromax/5.jpg

8. Wait the downloading, as the following pictures: if the process bar is blue, it means
during the download process, please do not interrupt it. If the bar is green, and it
shows “Download OK” it means the download is finish. While if the bar is red, it
means some failure happens during the download.
9. Finish. When you see the green bar and “Download OK” it means this flashing
process is done.

http://i1206.photobucket.com/albums/...Micromax/6.jpg

                      Download Here Flasher, driver And Flash File

 http://www.4shared.com/rar/qA4Squ48ce/Micromax_C100__QSC1100__downlo.html